Hypertherm Powermax30 - Introduction; Purpose; Tools and materials needed

Powermax30/30 XP/30 AIR Field Service Bulletin 805430 3
Power Cord Replacement
Introduction
Purpose
Describes the necessary steps to replace the power cord and strain relief on CSA and CE Powermax30 power supplies.
Powermax30 XP and Powermax30 Air systems: Complete instructions for installing these repair kits, as well as the
CCC power cord repair kit (428231) for the Powermax30 XP and the CE power cord repair kit (428390) for the
Powermax30 Air, are included in the Service Manual. To download the Service Manual, go to www.hypertherm.com
and
click the “Downloads library” link.
 Powermax30 XP Service Manual (808150)
 Powermax30 Air Service Manual (808850)
Tools and materials needed
 Assorted Phillips
®
and TORX
®
screwdrivers
 Needle nose pliers
 Adjustable wrench
WARNING!
ELECTRIC SHOCK CAN KILL
Disconnect electrical power before performing any maintenance.
See the Safety and Compliance Manual (80669C) for more safety
precautions.