Hytera BP36X - Squelch Off; Squelch Level; Scrambler

Supplementary Services
User Manual
16
Through Programmable Key
Press the preprogrammed
Squelch Off
key.
Through Squelch Interface
In the Settings interface, press the Up key or Down key to select Squelch, and then press the OK/Menu key.
Select Squelch, and then press the OK/Menu key.
8.4.2 Squelch Level
Squelch Level refers to the squelch threshold required for the speaker of the radio to be turned on. The higher squelch
level requires stronger signal.
To adjust Squelch Level, do either of the following:
Through Programmable Key
Press the preprogrammed
Adjust Squelch Level
key.
Through Squelch Interface
In the Settings interface, press the Up key or Down key to select Squelch, and then press the OK/Menu key.
(Optional) Set each squelch level.
a.
Select
Level Setting
, and then press the
OK/Menu
key.
b.
Select
Open Level
,
Normal Level
, or
Tight Level
, and then press the
OK/Menu
key.
c.
Select a level, and then press the
OK/Menu
key.
Select Squelch Level, and then press the OK/Menu key.
Select the Open, Normal, or Tight, and then press the OK/Menu key.
Level Standard: Open < Normal < Tight
8.5 Scrambler
Scrambler allows the radio to invert the frequency spectrum of transmitted audio signals. Only the receiving radio with
the same Scrambler settings can restore the audio signals. This prevents eavesdropping and ensures communication
privacy.
To enable or disable Scrambler, press the preprogrammed
Scrambler
key.