Hytera DMR - Basic Operations; Powering On;Off and Volume; Channel and Zone Selection; Keypad Lock;Unlock

9
Call
Transmitting a Private Call
You may transmit a Private Call through any of the
following methods. When transmitting a Private Call, the
icon will appear.
Transmitting a call to the preset contact
In standby mode, pressing PTT key will transmit an
individual call to the contact (a Private Call number) preset
for the current channel.
Transmitting a call through Contact List or Call Logs
1 Go to Contact -> Contact List, or go to Call Logs ->
Call List.
2 Use the Up/Down key to select the Private Call number
you want to call.
3 Hold down PTT key to transmit a Private Call to the
selected contact.
󱇲
Transmitting a call through Manual Dial
1 Go to Contact -> Manual Dial.
2 Input a Private Call number you want to call.
3 Hold down PTT key to transmit a call.
Transmitting a Group Call
You may transmit a Group Call through any of the
following methods. When transmitting a Group Call, the
icon will appear.
Transmitting a call to the preset contact
In standby mode, pressing PTT will transmit a Group Call
to the contact (a Group Call number) preset for the current
channel.
Transmitting a call through Contact List
1 Go to Contact -> Contact List.
2 Use the Up/Down key to select the Group Call number
you want to call.
3 Hold down PTT to transmit a Group Call to the
selected contact.
Transmitting an All Call
Methods are the same as those in Transmitting a Group
Call. When transmitting an All Call, the icon will
appear.
󱇲
󱇲
Note: Your dealer may preset a contact for
each digital channel. The preset contact could
be a Private Call number, a Group Call number
or an All Call number.
Basic Operations