6
Functions and Operations
Standby Screen
The feature allows you to quickly return to the previous
menu or the home screen.
Operation:
In the editing screen, press the programmed Home Screen
key, and the radio exits the screen and returns to the
previous menu immediately; in other screens, press the
key, and the radio returns to the home screen immediately.
Scan
The feature “Scan” allows you to listen to communication
activities on other channels so that you can keep a close
track of your team members.
Operation:
1. To enable the feature, you can select “On” from the
menu “Scan”; or
Press the programmed Scan key in standby mode; or
Switch to a channel for which the feature “Auto Scan”
is enabled via the programming software.
2. After the feature is enabled, your mobile radio will scan
according to the scan list set for the channel on which
scanning starts. The scanning process is as follows:
During scanning, LCD displays icon , and LED
ashes orange.
When activities are detected on a channel, the mobile
radio will stay on the channel to receive current
activities. If your mobile radio stays on a non-priority
channel, LCD will display icon ; if on Priority
Channel 1 or Priority Channel 2, LCD will display icon
or icon
respectively.
If you don’t want to hear activities on the channel,
press the programmed Nuisance Temporary Delete key
to remove the channel from the scan list temporarily.
If you want to continue staying on the channel, press
the programmed Monitor or Squelch Off key during
scan stay.
3. To exit the scanning process, you can select “Off” from
the menu “Scan”, or press the programmed Scan key
again.
Public Address
This feature allows public addressing via the external
speaker. After the feature is enabled, your voice will not be
transmitted, but output via the external speaker (connected
to the accessory jack on the rear panel) if you hold down
the PTT key and speak.
Operation:
1. Press the programmed Public Address key to enable
the feature.
To Next Page
Loading...
Need help?
General
