7
2. H o l d d o w n t h e P T T k e y a n d s p e a k i n t o t h e
microphone. Then your voice will be broadcasted
clearly via the external speaker.
3. To disable the feature, press the function key again.
Talk Around
You can continue to communicate in DM mode by pressing
the programmed Talk Around key, when your repeater
malfunctions, or when your terminal is out of the repeater’
s range but within talking range of other terminals.
Operation:
Press the programmed Talk Around key to switch between
DM mode and RM mode.
Monitor
To adjust match conditions for signal receiving, you can
enable the feature “Monitor”.
Note: When the feature is enabled, you cannot
transmit or receive, nor can you enter the menu.
Operation:
(1) Press the programmed Monitor key to enable the
feature, and the mobile radio displays icon . To
disable the feature, press this key again. Or
(2) Hold down the programmed Monitor Momentary key to
enable the feature, and the mobile radio displays icon
. To disable the feature, release this key.
Squelch Off
If the feature “Squelch Off” is enabled, your mobile radio’
s speaker will keep unmuted no matter whether carrier is
present.
Operation:
(1) Press the programmed Squelch Off key to enable
the feature. Then the mobile radio displays icon
and sounds background noise. To disable the feature,
press this key again. Or
(2) Press the programmed Squelch Off Momentary key
to enable the feature. Then the mobile radio displays
icon and sounds background noise. To disable the
feature, release this key.
Functions and Operations
Note: Under DM mode, the two terminals must be
within talking range of each other.
To Next Page
Loading...
Need help?
General
