Hytera DMR Installation

0
3. When icon appears, you can receive. And when a
call is received, the icon appears.
Two methods are available for you to exit the Emergency
mode:
1. After the preset Alarm Cycles and Voice Cycles
expire, the mobile radio will exit the Emergency mode
automatically.
2. Long press the programmed Emergency key.
Operation Methods for Digital Emergency
Emergency Alarm with Voice to Follow
Operation:
1. Press the programmed Emergency key to go to the
Emergency Revert Channel. The icon appears.
2. When the icon
appears, you can speak into the
microphone to make an emergency call.
3. When the icon
appears, you can receive. And
when a call is received, the icon appears.
󱇲
Note: Your dealer may set the number of alarm
cycles, alarm duration, number of voice cycles,
duration of each transmission and Tx interval.
If the preset Voice Cycles expire, you can press the PTT
key to make the emergency call again (the mobile radio
displays the icon , with red LED glowing). After the
emergency call is transmitted, please release the PTT key
to receive (the icon appears). When a call is received,
the icon appears.
To exit the Emergency mode, long press the programmed
Emergency key.
Ignition Sense
The following options are available via the vehicle ignition.
You may ask your dealer to assign any one to your mobile
radio.


PTT Disable: The PTT key is enabled or disabled by
following the ignition sense.
Operation: To enable the PTT key, start the engine; to
disable the PTT key, stop the engine.


Ignition or Switch: The mobile radio powers on or off
by following either the ignition sense or the Power On/
Off key.
Note: Your dealer may set the number of voice
cycles, duration of each transmission and Tx
interval.
Functions and Operations

Hytera DMR Specifications

General

Brand	Hytera
Model	DMR
Category	Radio
Language	English