9
Emergency Alarm
with Call
In this mode, you c an s e nd
alarm information by pressing
the programmed Emergency
key. When icon appears,
you can speak into the micro-
phone, allowing your voice and
background noise to be trans-
mitted automatically (you do not
need to hold down the PTT key).
Emergency Alarm
with Voice to Follow
In this mode, you can press the
programmed Emergency key
to go to the Emergency Revert
Channel. When icon ap-
pears, you can speak into the
microphone, allowing your voice
and background noise to be
transmitted automatically (you
do not need to hold down the
PTT key).
Operation Methods for Analog Emergency
Emergency Alarm
Operation: Press the programmed Emergency key to send
alarm information. The mobile radio displays icon and
text information “Sending Alarm!”, with red LED glowing. If
“Local Emergency Alarm” is enabled via the programming
software, an alarm tone will sound.
Two methods are available for you to exit the Emergency
mode:
1. Once the Alarm Cycles expire, the mobile radio will exit
the Emergency mode automatically.
2. Long press the programmed Emergency key.
Emergency Alarm with Call
Operation:
1. Press the programmed Emergency key to send
alarm information. The mobile radio displays icon
and text information “Sending Alarm!”, with red LED
glowing. If “Local Emergency Alarm” is enabled via the
programming software, an alarm tone will sound.
2. When icon
appears, you can speak into the
microphone to make an emergency call.
Functions and Operations
To Next Page
Loading...
Need help?
General
