Scan On/Off
The feature “Scan” allows you to listen to communication
activities on other channels so that you can keep a close
track of your team members. This option is used to enable
or disable the function.
Scan List
You can request your dealer to create a scan list for each
channel. Each list may contain 32 channels at most (either
digital channel or analog channel is OK). After accessing
the list, you can perform any of the following operations:
Adding a Channel
To include a new channel into the active scan list.
Editing Priority Channel
To set the selected channel as a non-priority or as a
priority channel. If you are interested in activities on a
channel, you can set it as a priority channel, which will be
scanned more frequently than a non-priority channel.
Each scan list may contain two priority channels at most.
indicates priority channel 1, and indicates priority
channel 2.
Deleting a Channel
To remove a channel from the active scan list. However,
the rst channel in the list can not be deleted.
Zone
To access this item, press Menu key in idle mode and then
select “Zone”.
After accessing this menu, press Up/Down key to select
your desired zone, and then press OK key to apply your
selection.
Settings
To access this item, press Menu key in idle mode and then
select “Settings”.
Menu Navigation
To Next Page
Loading...
Need help?
General
