Hytera TM-610 - Page 14

第 14 页 共 41 页
During the auto reset time after successful decoding
Flash orange
(less frequently)
Missed call alert after successful decoding Flash orange
(more frequently)
Scan Flash green
LCD Display
Fig. LCD
Indicator Description
Display CH number/alias, zone number, DTMF number, frequency,
menu and options, etc.
Low Tx power
The icon appears when:
1. The monitor status is entered through the Monitor key and the
channel is initialized as Monitor Squelch.
2. The monitor status (Auto Reset Mode) is entered through call
and decoding.
3. The monitor status is entered through Force Monitor.
4. Carrier mode in the Rx Squelch Mode.
5. Monitor requesting authorization.
The icon appears when the speaker is on.
Appear when scanning