Mounting Bracket Kit Fuse Power Cord
Installation
Installation Guidelines
Do not mount the mobile radio overhead or on a sidewall unless you take special
precautions.
If the mobile radio is not properly installed, road shock could bump the radio loose,
and the falling radio could, in some circumstances, cause serious injury to the driver
or a passenger. In case of vehicle accidents, even when properly installed, the radio
could break loose and become a dangerous projectile.
Mobile antenna Installation: Install the mobile antenna at least 82cm (32 inches) away
from your body, in accordance with the requirements of the antenna
manufacturer/supplier.
Install the Radio
1. Attach the mounting bracket, using the 4.8 x 20mm self-tapping screws, in a location
where convenient operation is accessible.
2. Connect the antenna and the supplied power cable to the radio.
3. Slide the radio into the mounting bracket and secure it using the Adjustment knobs.
4. Mount the microphone hanger, using the 4 x 16mm self-tapping screws, in a location
To Next Page
Loading...
