第 33 页 共 41 页
TOT Reset Time
Press the PTT key, and TOT times. Release the PTT key, and the TOT reset timer times.
TOT won’t reset upon the release of the PTT key unless the TOT reset timer times out.
The TOT reset time (Off, 1-255 seconds) is set by your dealer.
Programmable Auxiliary Functions
Your dealer can program the following auxiliary functions to the programmable keys
[P1]-[P4] or [▲]/[▼].
Frequency Reverse
If communications between radios are disrupted because of a long distance from the
repeater, the Reverse Frequency function can be used to re-establish communications to
another radio. When the function is activated, the transmit frequency and receive
frequency will be reversed. The corresponding CTCSS/CDCSS encode and decode
signals will also be reversed.
Press the key programmed as Reverse to toggle the function on/off.
On Off
Talk Around
If the function is enabled, the Rx frequency is used in place of the Tx frequency when
transmitting, and the CTCSS/CDCSS decoding signal is used in place of the encoding
signal.
Press the key programmed as Talk Around or select through the menu to toggle the
function on/off.
On Off
Selectable Tx Power
Press the key programmed as Adjust Power Level to toggle between high and low power.
To Next Page
Loading...
