第 22 页 共 41 页
Send 5-Tone Signaling
You may set on each channel the Call key and PTT ID. Press the Call key to transmit the
assigned telegram.
Function keys as [P1]-[P4], [▲]/[▼] and [A]-[D] can be defined as the Call key.
1. Send through the Call Key
● Define the function key as the Call key.
● Define the telegram corresponding to the Call key on the channel.
● Press the Call key to send the telegram
2. Send PTT Key-up ID
You may configure whether to transmit telegram upon each PTT press. When the PTT ID
is enabled, you may select a type of PTT ID transmission from the following:
● Once Only: transmit once only when the Auto Reset Mode is inactive.
● Periodic: transmit periodically, controlled by other parameters.
● Every: transmit upon each PTT press
3. Send PTT De-key ID
● Send the PTT De-key ID when the PTT key is released.
4. Telegram Repeat
If a call is failed (no reception of ACK or failure of Tx Admit Criteria), the radio will
automatically repeat, provided that you set the telegram property as Telegram Repeat.
The repeat times are programmable.
5. Successful Transmission
Once the transmission is over, the radio unmutes and the programmable auto
reset timer activates.
The icon appears on LCD.
Disables the auto reset timer. You may configure whether to transmit the
disconnect ID.
To Next Page
Loading...
