25
LOCKOUT MODE CLOCK
This allows the administrator to
restrict user access to certain
functions and settings by enabling
one of three modes:
T/L ONLY: Users can Tighten/
Loosen only.
T/L+TORQUE: Users can Tighten/
Loosen and adjust Torque.
ANGLE DELAY: Prevents users
from adjusting Angle Delay.
Set the time and date by entering
appropriate numerical values.
Press up button h increases the value
and down button i to decrease the
value, select g to advance to the
next numerical value, after setting
year push g to return to SYSTEMS
SETTINGS menu.
ENTER GENERAL ENTER GENERAL
(CONT’D.)
To Next Page
Loading...
