LITHIUM SERIES® Electric Torque Tool (BTM and BTM-DOC Models) Operations Manual
24
ADMIN MENU
ADMIN CODE ADMIN CODE SYSTEM
ADMIN CODE GENERAL
The ADMIN menu contains features typically only configured by an administrator
or supervisor.
• The green bar highlights the current position
• Press left button (i) to scroll down, right button (h) to scroll up
• Press the center button (g) to select and display a sub-menu
Select either SYSTEM
or GENERAL access
level.
The SYSTEM level is
only used by certified
personnel for
calibrating the tool.
The GENERAL level
password is assigned
by an administrator
to provide security for
setting torque limits,
setting the clock and
putting the tool in
lockout mode.
Enter the old 4 digit unlock code (default 0000)
for access and then enter a new unlock code
for system access.
NOTE: When System password is entered the
General password is cleared to 0000.
Enter the old 4 digit unlock code (default 0000)
for access and then enter a new unlock code for
system access.
(CONT’D.)
To Next Page
Loading...
