Hytorc LITHIUM Series Operation Manual

23
SYSTEM MENU / SETUP DEVICE SUB MENU
The Setup Device Sub-menu contains device-level settings.
• The green bar highlights the current position
• Press left button (i) to scroll down, right button (h) to scroll up
• Press the center button (g) to select and display a sub-menu
The user can enable or
disable AUTO-OFF. If
enabled, AUTO-OFF will
power down the tool after
5 minutes of activity.
Scroll down i or scroll
up h to select AUTO-OFF
state and push g to select
desires option and return
to the SYSTEM menu.
When enabled, the beeper
will sound once for each
successful operation, and 4
times to indicate an error.
Orient the display in normal
or inverted mode.
NORMAL: Legible when
battery is down.
INVERT: Legible when
battery is up.
INVERT FOR CAL:
Inverted for calibration
Adjust brightness of
display screen (10 = max,
0 = o)
AUTOOFF BEEPER DISPLAY ROTATION LED BRIGHTNESS
(CONT’D.)

Hytorc LITHIUM Series Specifications

General

Brand	Hytorc
Model	LITHIUM Series
Category	Tools
Language	English