Hytorc LITHIUM Series Operation Manual

LITHIUM SERIES® Electric Torque Tool (BTM and BTM-DOC Models) Operations Manual
22
SYSTEM MENU
The SYSTEM menu contains additional settings for tool configuration.
• The green bar highlights the current position
• Press left button (i) to scroll down, right button (h) to scroll up
• Press the center button (g) to select and display a sub-menu
NOTE: BATTERY SETUP, CALIBRATE GUN, FORMAT NVRAM and DIAGNOSTIC options
are not intended for field use, these are only accessed by HYTORC authorized service
personnel.
Displays Firmware (FW) and Hardware
(HW) versions for MDC (Motor Drive
Control) And UIC (User Interface
Control). Press any button to return to
SYSTEM menu.
(CONT’D.)

Hytorc LITHIUM Series Specifications

General

Brand	Hytorc
Model	LITHIUM Series
Category	Tools
Language	English