IAI RCM-GW-CC - Page 98

To Next Page

To Previous Page

The following shows an example that a remote I/O exclusive one station is set to the station No.1 and gateway

unit is set to the station No.2.

(1) Remote I/O

[1] Master station ← Gateway unit

Master station

Remote I/O station

(Station No. 1: Exclusive

one station)

Gateway unit

RCM-GW-CC

(Station No. 2: Exclusive

four stations)

Buffer address Remote input (RX)

For station No. 1

For station No. 2

For station No. 3

For station No. 4

For station No. 5

For station No. 6

For station No. 7

For station No. 8

For station No. 9

Output

[2] Master station → Gateway unit