IBC AHU Series User Manual

If there are multiple IBC-AHUs in the area, the appliance with the strongest signal will likely
be the controller you want to connect to.
2. Select IBC-AHU-xxxxx.
3.
The first time you connect, enter 1234567890 when prompted for a password.
Depending on the version of Android your device has, after a few seconds you may see a
warning, as shown below.
With the AHU cover off, the LEDs on the circuit board will start blinking simultaneously in a
ON-OFF-ON-OFF-OFF-OFF pattern when connected.
4. Tap the device's back button to return to the IBCconnect app, then tap GET STARTED to
access the Home page to start adjusting settings.
3.6.2.2 Connecting an iOs device
The IBCconnect app requires an IBC-AHU WiFi connection. You need to change some app settings
after installation.
1. In the main iPhone settings, select Cellular.
2. Scroll down to IBCconnect (under Cellular Data), and set to Off.
3. Navigate to the device’s WiFi Settings.
4.
Connect to the IBC-AHU WiFi.
52
Section: Operation

IBC AHU Series Specifications

General

Brand	IBC
Model	AHU Series
Category	Air Handlers
Language	English