IBC AHU Series User Manual

The IBC-AHU will appear in the device’s list of WiFi Access Points as “IBC-AHU-xxxxx”, where
“xxxxx” is the serial number of the controller in the IBC-AHU. If there are multiple IBC-AHU’s in
the area, the appliance with the strongest signal will likely be the controller you want to connect
to.
5. Select IBC-AHU-xxxxx.
6.
The first time you connect, enter 1234567890 when prompted for a password.
With the AHU cover off, the LEDs on the circuit board will start blinking simultaneously in a ON-
OFF-ON-OFF-OFF-OFF pattern when connected.
7. Exit from the "Setting" screen and open the IBCconnect app again.
8. Check your device is connected to the IBC-AHU-xxxxx WiFi connection. This will display the
landing page.
The landing page that appears after starting IBCconnect will depend on the device and whether you have
connected to IBC's AHU WiFi.
3.6.3 Programming the air handling unit using the app
The IBC factory pre-programs the name of the model (AHU 800, AHU 1200 or AHU 1600) in the
appliance. However, you will need to use the app to set the heating and cooling mode and to change
default settings.
53
3.6.3 Programming the air handling unit using the app

IBC AHU Series Specifications

General

Brand	IBC
Model	AHU Series
Category	Air Handlers
Language	English