75
EC DECLARATION OF CONFORMITY
Name and address of manufacturer:
Maruyama Mfg.Co., Inc.
4-15 Uchi-kanda 3-Chome, Chiyoda-ku Tokyo 101-0047 Japan
Name and address of the person who compiled the technical files:
Obelis European Authorized Representative Center (O.E.A.R.C.)
Boulevard Général Wahis, 53, B-1030 Brussels, Belgium
Tel: +(32) 2. 732.59.54 Fax: +(32) 2.732.60.03 E-Mail : mail@obelis.net
Name and address of the european authorized representative:
Obelis European Authorized Representative Center (O.E.A.R.C.)
Boulevard Général Wahis, 53, B-1030 Brussels, Belgium
Tel: +(32) 2. 732.59.54 Fax: +(32) 2.732.60.03 E-Mail : mail@obelis.net
Herewith declares that:
Portable Chain Saw. Type: IBEA 3000
The Chain Saw is powered internal combustion-engine.
Installed power: 1.04 kw
Serial number: A000001～
～～
～M999999
Complies with:
-The provisions of the “Machinery” Directive 2006/42/EC, and use of harmonized standard ISO 11681-2:2011.
The guaranty of “CE Type Approval”
Certificate No.: M3 69250896 0001
Machinery Technical File No.: TCF-0029-06
By the hereunder listed notified body: TÜV Rheinland InterCert Kft.
H-1132 Budapest, Váci út 48/A-B Hungary
Notified body No. 1008
-The provisions of the “Electromagnetic compatibility” 2004/108/EC, and applicable supplements.
-The provisions of the “Noise emission in the environment by equipment for use outdoors Directive 2000/14/EC.
Measured sound power level : 108 dB(A)
Guaranteed sound power level : 110 dB(A)
-The provisions of the “Emission of gaseous and particulate pollutants from internal
combustion engines to be installed in non-road mobile machinery “ Directive 97/68/EC,
amended 2010/26/EU.
And furthermore declares that
-The following (parts/clauses of) technical standards and specifications have been used:
CISPR12/2007 +A1/2009. Limits and methods of measurement of radio interference characteristics
of vehicles, motor boats and spark-ignited engine-driven.
Maruyama Mfg.Co.,Inc.
4-15 Uchi-kanda 3-Chome,
Chiyoda-ku,Tokyo,
101-0047 Japan
Originals Instruction
GB
Junichi Sugimoto
Managing Director
October 25, 2015
To Next Page
Loading...