Ibex Dental Technologies SUMMIT - Volume; Info

18
6. Volume – This button brings up the Volume select screen. There are three volume level
choices, Low, Medium and High. The default setting is High. To change the volume level,
touch either of the buttons not selected. A beep at the associated volume level will be heard
allowing you to choose which volume setting works for you.
Display Example #10
The INFO screen displays the current software version that the SUMMIT is running. Additionally, the
INFO screen provides the total number of hours that the furnace has been powered on, the number of
hours and minutes that the door lift motor has been run and the total number of hours and minutes of
power applied to the muffle. The last counter displays the number of firings the furnace has run.
The ability to reset the last 3 counters is password protected by a 6 character code and is reserved for
factory use only.
Info
SW Version: 2010R(T)
Total On Time: 00720:18
Door Time: 02:45:50
Heater On Time: 00065:17
Firing Cycles: 229
Ok
Rese
t
Information 450 C 0cmHg
08/13/12
02:15:45
Rese
t
Rese
t
S/N 0999908
Volume
Medium
High Low
Ok