21
There is no requirement or ability to calibrate the temperature of your SUMMIT furnace. If you feel
that your furnace is not firing at the proper temperature or if you have any other operating questions
please call tech support at 877-370-4242 or email us at techsupport@ibexdental.com.
Display Example #11
The calibration button is provided to calibrate the following furnace functions:
1. Touch Screen Calibration
2. Door Calibration
3. Vacuum Calibration
4. Pressing Plunger Calibration (Pressing Furnace only)
Calibration
Ok
Calibration 450 C 0cmHg
08/13/12
04:15:45
Screen
Vacuum
Press
Door
To Next Page