IBM 360 User Manual

IBM Internal Use Only
Measuring Techniques (Continued)
Example 4 28
Measured System Functions 24
Terminology 24
Monitor Probes
Assignment Planning Form 9
Attachment Points 9
Cable 10
Connecting the 9
Description 9
Extension Cable 10
Nominal Signal Delay 16
NOT Function
Connections for 13
Operational Control Panel 1 36
Operational Control Panel 2 37
Not True (+ level) 11
Ones Retention Test 22
Operating Controls 8
Operating Procedures for
Basic Counter Unit 8
1057/1058 19
Operational Control Panel 1 36
Operational Control Panel 2 37
Operator’s Panel 8
Optional Accessory, 1057/1058 Card Punch 19
OR Function
Connections for 12
Operational Control Panel 1 36
Operational Control Panel 2 37
OR LATCH Function
Connections for 13
Operational Control Panel 1 36
Operational Control Panel 2 37
Outlets
Convenience 6
Primary 6
Patch Panel
AND Function 12
Cords 11
Description 10
FANOUT Function 14
Image Card 17
LATCH as FANOUT 14
LATCH Function 13
Operational Control Panel 1 36
Operational Control Panel 2 37
OR Function 12
OR LATCH Function 13
Signal Definition 11
Test 23
Test Panel 38
Wiring the 10
XLF Panel 38
Performance Tests 22
Pin Locations 9
Plus (+1) A B C D 14
Plus (+1) E F G H 14
Power and Portability 6
Power-Off Switch 8
Power-On Switch 8
Primary Outlet 6
Probe
Assignment Planning Form 9
Attachment Points for
1130 Computing System 9
1800 Data Acquisition and Control System 9
System/360 9
Description 9
Processor Not Active 24
Program Status Word (PSW) 24
Punch Go Switch 8
Punch Ready Indicator Light 9
Rotary Switch, Counter Display 9
Self-Generated True Signals 14
Signal Cable 10
Signal, CPU or I/O 11
Signal, Patch Panel 11
Standard Accessory 9
Start Hub 15
Start Switch 8
Starting the Basic Counter Unit 8
Stop Hub 15
Stop Switch 8
Stopping the Basic Counter Unit 8
Strobe 15
Switches
Check Reset 8
Lamp Test 8
Machine Reset 8
Power-Off 8
Power-On 8
Punch Go 8
Start 8
Stop 8
Test 1 Hub 38
Test 2 Hub 38
Test Mode Indicator Light 9
Test Panel 38
Testing Procedure for
Basic Counter Unit 22
1057/1058 23
Timing Rate of Counter 16
Total Compute 24
Total Elapsed Time 24
Total Wait 24
True (- level) 12
True Signals, Self-Generated 14
Wait and Any Channel Busy 24
Wait Only 24
Wiring for
Example 1 27
Example 2 27
Example 3 28
Example 4 29
Wiring the Patch Panel
AND Function 12
FANOUT Function 14
LATCH as FANOUT Function 14
LATCH Function 13
NOT Function 13
OR Function 12
OR LATCH Function 13
42

IBM 360 Specifications

General

Brand	IBM
Model	360
Category	Network Hardware
Language	English