IBM 9223-42H - System covers; Removing and replacing covers on the 5105-22 E, 9008-22 L, 9009-22 A, 9009-22 G, 9009-41 A, 9009-41 G, 9009-42 A, 9009-42 G, 9223-22 H, 9223-22 S, 9223-42 H, or 9223-42 S system; Removing the front and side cover; Removing the front cover from a rack-mounted 5105-22 E, 9008-22 L, 9009-22 A, 9009-22 G, 9223-22 H, or 9223-22 S system

2. To power off the system, complete the following steps:
a) In the navigation area, click the Resources icon , and then click All Systems.
b) Select the system that you want to power off.
c) In the content pane, click Actions > View All Actions > Power Off.
d) Click Finish.
System covers
Use these procedures to remove and replace the covers on IBM Power Systems servers.
Removing and replacing covers on the 5105-22E, 9008-22L, 9009-22A, 9009-22G,
9009-41A, 9009-41G, 9009-42A, 9009-42G, 9223-22H, 9223-22S, 9223-42H, or
9223-42S system
Use these instructions to remove and replace the covers on a 5105-22E, IBM Power
®
System L922
(9008-22L), IBM Power System S922 (9009-22A and 9009-22G), IBM Power System H922 (9223-22H),
IBM Power System H922S (9223-22S), IBM Power System S914 (9009-41A and 9009-41G), IBM Power
System S924 (9009-42A and 9009-42G), IBM Power System H924 (9223-42H), or IBM Power System
H924S (9223-42S) server so that you can access the hardware parts or perform service.
Removing the front and side cover
Use these instructions to remove the front and side cover from a 5105-22E, IBM Power System L922
(9008-22L), IBM Power System S922 (9009-22A and 9009-22G), IBM Power System H922 (9223-22H),
IBM Power System H922S (9223-22S), IBM Power System S914 (9009-41A and 9009-41G), IBM Power
System S924 (9009-42A and 9009-42G), IBM Power System H924 (9223-42H), or IBM Power System
H924S (9223-42S) server so that you can access the hardware parts or perform service.
Removing the front cover from a rack-mounted 5105-22E, 9008-22L, 9009-22A, 9009-22G, 9223-22H,
or 9223-22S system
Use this procedure to remove the cover from a rack-mounted 5105-22E, IBM Power System L922
(9008-22L), IBM Power System S922 (9009-22A and 9009-22G), IBM Power System H922 (9223-22H),
or IBM Power System H922S (9223-22S) server.
About this task
The cover needs to be removed to service the following parts:
• Control panel and cable
• Control panel display and cable
• Fans
• Front USB cable
You do not need to remove the front cover to service the disk drives.
Procedure
1. Ensure that you have the electrostatic discharge (ESD) wrist strap on and that the ESD clip is
connected to an unpainted metal surface. If not, do so now.
2. Remove the front cover by pulling it away from the system.
The cover has indentations (A) where you can hold it more easily. See Figure 4 on page 19
.
18
Power Systems: Common procedures for installable features