Figure 59. Connecting the power cords
3. Close the rack door at the rear of the system.
Installing or replacing a part by using an HMC
You can use the Hardware Management Console (HMC) to perform many service actions, including the
installation of a new eld-replaceable unit (FRU) or parts.
Installing a part by using the HMC
You can use the Hardware Management Console (HMC) to perform many service actions, including the
installation of a new feature or part.
Procedure
1. In the navigation area, click the Resources icon
, and then click All Systems.
2. Click the system name for which you want to install the part.
3. In the navigation area, click Serviceability.
4. In the Serviceability window, click Add FRU (eld replaceable unit).
Common procedures for installable features
83
To Next Page
Loading...
