Note: Slide the system unit slowly into the rack to ensure that your ngers do not get caught in the
side rails.
Figure 51. Placing the system into the operating position
3. Using your labels, reconnect all of the external cables that plug into the PCIe adapters.
Power cords
Use these procedures to disconnect and connect the power cords in IBM Power Systems servers.
Disconnecting power cords
Use these procedures to disconnect the power cords from 5105-22E, IBM Power System L922
(9008-22L), IBM Power System S922 (9009-22A and 9009-22G), IBM Power System H922 (9223-22H),
IBM Power System H922S (9223-22S), IBM Power System S914 (9009-41A and 9009-41G), IBM Power
System S924 (9009-42A and 9009-42G), IBM Power System H924 (9223-42H), or IBM Power System
H924S (9223-42S) server.
70
Power Systems: Common procedures for installable features
To Next Page
Loading...
