IBM BladeCenter HX5 User Manual

v Integrated Management Module User's Guide
This document explains how to use the functions of the IMM that is installed in
an IBM server. The IMM works with IBM System x
®
Server Firmware to provide
systems-management capability for System x and BladeCenter servers.
v Advanced Management Module User's Guide
This document provides information about configuring the advanced
management module and managing components that are installed in an IBM
®
BladeCenter
®
chassis.
v Advanced Management Module Command-Line Interface Reference Guide
This document explains how to use the advanced management module
command-line interface (CLI) to directly access BladeCenter management
functions. The command-line interface also provides access to the text-console
command prompt on each blade server through a Serial over LAN (SOL)
connection.
v Advanced Management Module Messages Guide
This document provides a complete list of all non-device specific events and
recommended actions, sorted by event ID. Device-specific event information is
available in the Problem Determination and Service Guide.
In addition to the documentation in this library, be sure to review the Planning and
Installation Guide for your BladeCenter chassis for information to help you prepare
for system installation and configuration.
To check for updated documentation, complete the following steps.
1. Go to http://www.ibm.com/systems/support/.
2. Under Product support, click BladeCenter.
3. Under Popular links, click Publications lookup.
4. From the Product family menu, select BladeCenter HX5 .
You can also find documentation that is related to BladeCenter products at
http://publib.boulder.ibm.com/infocenter/bladectr/documentation/index.jsp.
The IBM Documentation CD
The IBM Documentation CD contains documentation for your blade server in
Portable Document Format (PDF). It includes the IBM Documentation Browser to
help you find information quickly.
You can run the IBM Documentation CD on any personal computer that meets the
hardware and software requirements.
Hardware and software requirements
Use this information to determine the minimum hardware and software
requirements for the blade server.
The IBM Documentation CD requires the following minimum hardware and
software:
v Microsoft Windows XP, Windows 2000, or Red Hat Enterprise Linux 5 Server
v 100 MHz microprocessor
v 32 MB of RAM
v Adobe Acrobat Reader 3.0 (or later) or xpdf, which comes with Linux operating
systems
4 IBM BladeCenter HX5 Type 7873, 7872, 1910, and 1909: Installation and User's Guide

IBM BladeCenter HX5 Specifications

General

Brand	IBM
Model	BladeCenter HX5
Category	Server
Language	English