Figure 3. Logical conguration sequence
RAID implementation
RAID implementation improves data storage reliability and performance.
Redundant array of independent disks (RAID) is a method of conguring multiple drives in a storage
subsystem for high availability and high performance. The collection of two or more drives presents the
image of a single drive to the system. If a single device failure occurs, data can be read or regenerated
from the other drives in the array.
RAID implementation provides fault-tolerant data storage by storing the data in different places on
multiple drives. By placing data on multiple drives, I/O operations can overlap in a balanced way to
improve the basic reliability and performance of the attached storage devices.
Chapter 1. Overview
15
To Next Page
Loading...
