Table 12. Feature codes for hardware features (continued)
Feature
code Feature Description
1101 5 ft. ladder For servicing components at a height of
35U or more
1102 3 ft. platform ladder For servicing components at a height of
20U or more
1103 Rolling step stool For servicing all models
1105 DS8900F rack doors 40U DS8900F branded front door and 40U
perforated rear door
1106 Space Saver front and rear door Two 40U perforated doors to minimize
depth
1107 Rack side cover pair Optional 40U rack side covers
For model E96, this requires feature code
1341
1303 Gen2 I/O enclosure pair
1310 Rack management switch pair For model 996, one is required if expansion
frame E96 is added
1340 PCIe3 cable set for adjacent expansion
frame
Connects device and host adapters in an
I/O enclosure pair to the processor.
For an adjacent expansion frame model
E96, one per I/O enclosure pair is required
1341 20 m (65.6 ft) PCIe3 cable set for remote
expansion frame
Connects device and host adapters in an
I/O enclosure pair to the processor.
For a remote expansion frame model E96,
one per I/O enclosure pair is required
1401 Top-exit bracket for Fibre Channel cable Overhead cabling management for model
994, 996, or E96
1410 Fibre Channel cable 40 m (131 ft), 50 micron OM3 or higher,
multimode LC
1411 Fibre Channel cable 31 m (102 ft), 50 micron OM3 or higher,
multimode LC/SC
1412 Fibre Channel cable 2 m (6.5 ft), 50 micron OM3 or higher,
multimode LC/SC Jumper
1413 Fibre Channel cable 3 m (10 ft), 50 micron OM3 or higher,
multimode LC
1420 Fibre Channel cable 31 m (102 ft), 9 micron OS1 or higher,
single mode LC
1421 Fibre Channel cable 31 m (102 ft), 9 micron OS1 or higher,
single mode LC/SC
1422 Fibre Channel cable 2 m (6.5 ft), 9 micron OS1 or higher, single
mode LC/SC Jumper
24 IBM DS8900F: DS8900F Introduction and Planning Guide
To Next Page
Loading...
Need help?
General