To Next Page

To Previous Page

/opt/ibm/ess/tools/bin/ess3kplt -t memory --local

15. Check CPU.

/opt/ibm/ess/tools/bin/ess3kplt -t cpu --local

16. Check sensors.

ipmitool sensor | grep -v discrete | grep -v na

17. Check the product information.

dmidecode -t1

The key values are as follows:

• Manufacturer: IBM

• Product Name: ESS 3200: -[5141FN1]-

POWER9 EMS

1. Check the storage quickly.

/opt/ibm/ess/tools/bin/essstoragequickcheck -N localhost

2. Assign an IP address to the management interface.

nmcli c del mgmt ; nmcli con add type ethernet con-name mgmt ifname mgmt ipv4.addr

'192.168.20.21/24' ipv4.method manual connection.autoconnect yes ; nmcli c reload ; nmcli c

up mgmt

3. Assign an IP to the FSP interface.

nmcli c del fsp ; nmcli con add type ethernet con-name fsp ifname fsp ipv4.addr

'192.168.20.21/24' ipv4.method manual connection.autoconnect yes ; nmcli c reload ; nmcli c

up fsp

4. Check the management interface.

/sbin/ifconfig mgmt

5. Check FSP interface.

/sbin/ifconfig fsp

6. Assign an IP to the campus interface.

nmcli c del campus ; nmcli con add type ethernet con-name campus ifname campus ipv4.addr

'172.16.0.0/24' ipv4.method manual ipv4.gateway 172.16.0.1 connection.autoconnect yes ;

nmcli c reload ; nmcli c up

7. Check the campus interface.

/sbin/ifconfig campus

8. Check serviceable events.

/usr/sbin/opal-elog-parse -s

9. Gather serviceable event details.

100

IBM Elastic Storage System 3200: Hardware Planning and Installation Guide

IBM Elastic Storage System 3200 User Manual

Other manuals for IBM Elastic Storage System 3200