IBM Elastic Storage System 3200 User Manual

Figure 54. Changing password
Type the password and press the Enter key to change the root password (you will be prompted
twice). The password to use is ibmesscluster.
When it is done, type exit and press the Enter key twice to go back to essutils.
Highlight Back and press the Enter key.
g. Highlight the SSR Tools menu as shown in the following gure and press the Enter key.
Figure 55. SSR tools
h. Highlight ESS 3200 SSR checks and press the Enter key.
Figure 56. ESS SSR checks
Note: If after hitting ESS 3200 SSR checks the terminal exits with an exception, it is likely your stty
session is not large enough. We default the session to the following sizes:
stty rows 40 cols 130
As a workaround you can log in as root (password = ibmesscluster) and do the following:
68
IBM Elastic Storage System 3200: Hardware Planning and Installation Guide

IBM Elastic Storage System 3200 Specifications

General

Brand	IBM
Model	Elastic Storage System 3200
Category	Storage
Language	English