IBM Elastic Storage System 3200 User Manual

Protocol node checks
The p9 protocol node requires very similar checks as the p9 EMS. The only difference is skip the following:
• Assign IP address to FSP Interface (EMS ONLY) (C11-T2)
• Check FSP interface (EMS ONLY) (C11-T2)
Perform any ping tests from the EMS if applicable (thus protocol node setup would be done before EMS if
a new environment).
Chapter 4. Installing81

IBM Elastic Storage System 3200 Specifications

General

Brand	IBM
Model	Elastic Storage System 3200
Category	Storage
Language	English