IBM Elastic Storage System 3200 User Manual

Note: You can nd and download the current IBM System Safety Notices by searching for Publication
number G229-9054 in the IBM Publications Center.
The following notices and statements are used in IBM documents. They are listed in order of decreasing
severity of potential hazards.
Danger notice denition
A special note that emphasizes a situation that is potentially lethal or extremely hazardous to people.
Caution notice denition
A special note that emphasizes a situation that is potentially hazardous to people because of some
existing condition, or to a potentially dangerous situation that might develop because of some unsafe
practice.
Note: In addition to these notices, labels might be attached to the product to warn of potential hazards.
Finding translated notices
Each safety notice contains an identication number. You can use this identication number to check the
safety notice in each language.
To nd the translated text for a caution or danger notice:
1. In the product documentation, look for the identication number at the end of each caution notice or
each danger notice. In the following examples, the numbers (D002) and (C001) are the identication
numbers.
DANGER:
A danger notice indicates the presence of a hazard that has the potential of causing
death or serious personal injury. (D002)
CAUTION: A caution notice indicates the presence of a hazard that has the potential of causing
moderate or minor personal injury. (C001)
2. After you download the IBM System Safety Notices document, open it.
3. Under the language, nd the matching identication number. Review the topics about the safety
notices to ensure that you are in compliance.
Danger notices for the system
Ensure that you are familiar with the danger notices for your system.
Use the reference numbers in parentheses at the end of each notice (for example, D005) to nd the
matching translated notice in IBM Systems Safety Notices.
DANGER:
When working on or around the system, observe the following precautions:
Electrical voltage and current from power, telephone, and communication cables are hazardous. To
avoid a shock hazard: If IBM supplied the power cord(s), connect power to this unit only with the
IBM provided power cord. Do not use the IBM provided power cord for any other product. Do not
open or service any power supply assembly. Do not connect or disconnect any cables or perform
installation, maintenance, or reconguration of this product during an electrical storm.
• The product might be equipped with multiple power cords. To remove
all hazardous voltages, disconnect all power cords. For AC power, disconnect all power cords
from their AC power source. For racks with a DC power distribution panel (PDP), disconnect the
customer’s DC power source to the PDP.
• When connecting power to the product ensure all power cables are properly connected. For
racks with AC power, connect all power cords to a properly wired and grounded electrical outlet.
Ensure that the outlet supplies proper voltage and phase rotation according to the system rating
4IBM Elastic Storage System 3200: Hardware Planning and Installation Guide

IBM Elastic Storage System 3200 Specifications

General

Brand	IBM
Model	Elastic Storage System 3200
Category	Storage
Language	English