20 IBM Desktop System HMM
Option ROM Scan
The options are Enabled and Disabled. Default value
is Enabled.
Enable Master
The options are Enabled and Disabled. Default value
is Disabled.
Latency Timer
The options are Default, 0020h, 0040h, 0060h,
0080h, 00A0h, 00C0h and 00E0h. Default value is
Default.
Security Menu
If you want to see information of password, such as
Supervisor Password, User Password, enter Security
Menu to review the settings in the computer.
Supervisor Password
This parameter is Clear, if you didn’t setup any
Supervisor Password.
Set Supervisor Password
For setting supervisor password, click Enter. Another
Sub-Menu will show, ask you to key-in new password
twice. Once done, press Esc return to Security
Menu.
Clear All Password
Press Enter to clear all password settings.
User Password
This parameter is Clear, if you didn’t setup any user
password.
Set User Password
For setting user password, click Enter. Another Sub-
Menu will show, ask you to key-in new password
twice. Once done, press Esc return to Security
Menu.
To Next Page
Loading...
