IBM NetVista - Removing the Computer Cover

Check Procedures 41
Diskette drive LED fails to
light, and the drive is unable
to access for more than 2
minutes.
1. Diskette
2. Diskette drive power
3. Diskette drive
connection/cable
4. Diskette drive
5. System board
Diskette drive test failed. 1. Diskette
2. Diskette drive
3. Diskette drive cable
4. System board
Hard Disk Drive
NOTE:
Ensure hard disk drive is configured correctly in
Configuration/Setup Utility, and cables/jumpers
are set correctly before diagnosing any hard disk
drive problems.
Hard disk drive test failed. 1. Enter Configuration/
Setup Utility and Load
default settings.
2. Hard disk drive cable.
3. Hard disk drive.
4. System board.
Hard disk drive format error. 1. Enter Configuration/
Setup Utility and Load
default settings.
2. Hard disk drive cable.
3. Hard disk drive.
4. System board.
Hard disk drive write error. 1. Enter Configuration/
Setup Utility and Load
default settings.
2. Hard disk drive.
Error Symptoms Action/FRU