IBM Power System POWER7 Series User Manual

11. Press Enter on the Complete Device Concurrent Add display to indicate that the disk drive is
installed.
12. Rebuild the data on the replacement disk drive. For instructions, go to “Rebuilding data on a
replacement disk drive by using Linux” on page 97.
13. Go to Verifying a repair. This completes this procedure.
Figure 34. Installing a disk drive in the system unit
Figure 35. Installing a disk drive in the system unit
96

IBM Power System POWER7 Series Specifications

General

Processor	POWER7
L2 Cache	256 KB per core
L3 Cache	4 MB per core
Memory Type	DDR3
Operating System	AIX, IBM i, Linux
Virtualization	PowerVM
Processor Cores	4, 6, or 8
Form Factor	Rack
Release Date	2010