Installing Windows 95 Software
10
Click on the OK button.
Windows 95 now starts copying files. The Insert Disk panel
asks for one of the Windows 95 installation diskettes or the
CD-ROM.
11
Change the source for Copying files from: to A:\ when
Windows 95 tries to copy IBMCSS01.VXD or IBMPCDIF.VXD.
12
Insert the PC Card Director Diskette for OS/2 and Windows 95
into the diskette drive; then click on OK.
IBMCSS01.VXD and IBMPCDIF.VXD are copied from the
diskette.
13
Click on the OK button at the Insert Disk panel.
Note:
These files were copied when you
installed the Windows 95 integrated
PCMCIA support software.
14
Click on the Skip File button at the Copying Files... panel when
Windows 95 tries to copy the following files:
CARDDRV.EXE
CSMAPPER.SYS
FLS1MTD.VXD
FLS2MTD.VXD
PCCARD.VXD
SRAMMTD.VXD
15
Restart the computer.
Installing the PC Card Director for Windows 95
To install the PC Card Director for Windows 95, do the following:
1
Start Windows 95; then open My Computer, Control Panel,
and then Add/Remove Programs.
2
Click on the Install... button.
3
Insert the PC Card Director Diskette for OS/2 and Windows 95
into the diskette drive; then click on the Next> button.
4
Click on the Finish button when you see “A:\INSTALLP.EXE”
on the screen.
5
Click on the Continue button when the opening panel of the
installation program appears on the screen. Follow the
instructions on the screen.
206
IBM ThinkPad 760E, 760ED, or 760EL User's Guide
To Next Page
Loading...
Need help?
General
