Using the ThinkPad Features Program
Using the ThinkPad Features Program
To install the ThinkPad Features
program:
Chapter 7.
ThinkPad Features is a control program that allows you to
configure your computer. Using the ThinkPad Features program,
you can easily set up and customize the built-in devices, such as the
parallel port or infrared port.
It also provides the Device Configuration Management System,
which automatically detects a system resource (such as IRQ, DMA,
I/O address, or memory) conflict, so that you can easily set up your
computer configuration for the new device or software. For more
detail about each device's resource, see Appendix A.
To start the ThinkPad Features program:
OS/2
WIN
WIN
WIN
If you are using OS/2 Warp or Windows,
select the ThinkPad
Features icon in your operating system:
ThinkPad Features
Default Cancel
Note:
Any buttons on the screen that
appear in gray are options that
cannot be set.
DOS
If you are using DOS
, you can use the PS2 commands at the
DOS command prompt, instead of this panel.
Chapter 3. Operating Your Computer 35
To Next Page
Loading...
Need help?
General
