Using the Enhanced Video/MPEG Functions
Using the Enhanced Video/MPEG Features
760
E
V
ideo
nh
The Enhanced Video feature provides the video overlay/capture and
MPEG functions and video in-out port on the side of the computer to
attach your home video equipment. It also provides the total image
video with MPEG-1 and MPEG-2 HHR (half-horizontal resolution).
With the Enhanced Video feature, you can take advantage of the
following:
MPEG playback: The MPEG playback viewer can play back
many available CD-i movies, video CDs, and karaoke MPEG
video titles. No DOS/CD-i game titles are currently supported.
MPEG2 titles are restricted to HHR at 4 Mbps.
Video-in (video capture):
– Capture still images or motion video from the video-in port.
– Overlay motion video from the video-in port.
Video-out: To use the video-out function, see “Attaching a
Television to the Computer” on page 61.
When using the video overlay/capture and MPEG functions, keep the
following in mind:
You cannot enable or disable the Enhanced Video feature, or
change from video-in to video-out, while the playback or capture
window is open. Close the playback or capture window before
you make changes.
The MPEG playback and the video-in (video capture) functions
use the same hardware resources. Only one of the two
functions can be used at the same time. For the same reason,
two MPEG functions cannot be used at the same time.
Chapter 3. Operating Your Computer 65
To Next Page
Loading...
Need help?
General
