Key
combination
Description
Fn+F6 Reserved.
Fn+F7 Switching a display output location
Switch between the computer display and an
external monitor (CRT). If an external monitor is
attached, computer output is displayed in the
following three patterns by turns:
v CRT display
v Computer display + CRT display
v Computer display
Notes:
1. For any operating system other than
Windows XP or Windows 2000, no
addtional procedure is needed. Just press
Fn+F7.
2. This function is not supported if different
desktop images are displayed on the
computer display and the external monitor.
3. This function does not work while a DVD
movie or a video clip is playing.
4. To enable this function in Windows 2000
and Windows XP, do the following:
a. Start Windows 2000 or Windows XP,
and log on to the system.
b. Press Fn+F7 and select a
display-switching function in the Initial
setup window.
Applying a presentation scheme
Apply a presentation scheme directly, with no
need to start Presentation Director. To enable
this function, do the following:
Note: This function is supported only in
Windows 2000 and Windows XP.
1. Start Windows 2000 or Windows XP, and
log on to the system.
2. Press Fn+F7. The Initial setup window
opens.
3. Select a presentation scheme function for
the Fn+F7 key combination. The setting
window opens.
4. Select the optional setting.
Fn+F8 Turn screen expansion on or off. (There is no
symbol on the key.)
Note: This function is not supported in
Windows XP and Windows 2000.
(continued)
Product overview
ThinkPad X30, X31 57
To Next Page
Loading...
Need help?
General
