Icom IC-7100

5
D-STAR OPERATION <BASIC>
5-12
Using the TX History D
Repeaters you transmitted to in the DR mode are stored
in the TX History, and you can select a repeater from
the TX History as your access repeater.
The TX History stores up to 10 of the latest “FROM”
(Access repeater) repeaters.
Push q
DR
(C) to select the DR mode.
Check whether or not “FROM” is selected. w
 •If“FROM”isnotselected,touchthe“FROM”eld.
Touch the “FROM” field. e
 •The“FROMSELECT”screenappears.
Touch “TX History.” r
 •The“TXHISTORY”screenappears.
Touch the repeater to use as your access repeater. t
 •Example:“Hirano”
 •ThetransceiverreturnstotheDRmodescreen,andthe
selected repeater is set in “FROM.”
When you push
QUICK
(C) in the step r, you can
display detailed repeater information on the TX HIS-
TORY screen, or delete it from there.
“FROM” is
selected.
Touch
“FROM”
Touch
“TX History”
“Hirano” repeater is selected in
“FROM.”
Touch the
repeater
( Example:
Hirano)
“FROM” (Access repeater) setting (Continued)
The L, R, C or D in the
instructions indicate the
part of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch screen)
L
eft
R
ight
C
enter
D
isplay