EasyManuals Logo

Icom IC-7300 Service Manual

Icom IC-7300
75 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
1-2
M Receiver
Receive system: Direct sampling superheterodyne
Intermediate frequency: 36 kHz
Sensitivity (Filter: SOFT):
SSB/CW (at 10 dB S/N)
1.8 ~ 29.999999 MHz Less than –123 dBm (0.16 μV) (P.AMP1 ON)
50 MHz band Less than –125 dBm (0.13 μV) (P.AMP2 ON)
70 MHz band*
2
Less than –123 dBm (0.16 μV) (P.AMP2 ON)
*
2
Depending on the transceiver version.
AM (at 10 dB S/N)
0.5 ~ 1.8 MHz Less than –85 dBm (12.6 μV) (P.AMP1 ON)
1.8 ~ 29.999999 MHz Less than –101 dBm (2.0 μV) (P.AMP1 ON)
50 MHz and 70 MHz bands Less than –107 dBm (1.0 μV) (P.AMP2 ON)
FM (at 12 dB SINAD)
28.0 ~ 29.7 MHz Less than –113 dBm (0.5 μV) (P.AMP1 ON)
50 MHz and 70 MHz bands Less than –119 dBm (0.25 μV) (P.AMP2 ON)
Squelch sensitivity (threshold):
SSB Less than –92 dBm (5.6 μV)
FM Less than –117 dBm (0.3 μV)
(HF band: P.AMP1 ON, 50 MHz band: P.AMP2 ON)
Selectivity (Filter: SHARP):
SSB (BW=2.4 kHz) More than 2.4 kHz/–6 dB
Less than 3.4 kHz/–40 dB
CW (BW=500 Hz) More than 500 Hz/–6 dB
Less than 700 Hz/–40 dB
RTTY (BW=500 Hz) More than 500 Hz/–6 dB
Less than 800 Hz/–40 dB
AM (BW=6 kHz) More than 6.0 kHz/–6 dB
Less than 10 kHz/–40 dB
FM (BW=15 kHz) More than 12.0 kHz/–6 dB
Less than 22 kHz/–40 dB
Spurious and image rejection: More than 70 dB (except for ADC aliasing)
Audio output power: More than 2.5 W
(at 10% distortion into the 8 Ω load, at the 1 kHz reference)
Output impedance (Speaker): 8 Ω
RIT variable range: ±9.999 kHz
M Antenna tuner
Tunable impedance range: 16.7~150 Ω (unbalanced) (less than 3:1 VSWR)
Tuning accuracy: Less than 1.5:1 VSWR
Tuning time (approximately): 2~3 seconds (average)
15 seconds (maximum)
LAll stated specications are typical and subject to change without notice or obligation.

Other manuals for Icom IC-7300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Icom IC-7300 and is the answer not in the manual?

Icom IC-7300 Specifications

General IconGeneral
Product typePortable CB radio
Product colorBlack
Housing materialSteel
Input voltage13.8 V
Microphone includedYes
Output power100 W
Frequency range0.5 - 70 MHz
Channels quantity101 channels
Compatible productsAH-2B; AH-4; AH-5NV; AH-710; AH-740; CT-17; HM-219; MB-118; MB-123; OPC-2321; OPC-420; OPC-599; PS-126; RC-28; SM-30; SM-50; SP-23; SP-33; SP-34; SP-35; SP-35L; SP-38; SP-41;
Display typeLCD
Weight and Dimensions IconWeight and Dimensions
Depth238 mm
Width240 mm
Height94 mm

Related product manuals