Icom IC-7300 - Page 11

11
■ CI-V commands
D Command formats
A7292-10EXV1.40
• Scope Fixed edge frequency settings
Command: 27 1E
LEntry of less than 100 Hz digits are ignored.
1 Selectable Frequency ranges:
Data Frequency range (Hz)
01 0.03 ~ 1.60
02 1.60 ~ 2.00
03 2.00 ~ 6.00
04 6.00 ~ 8.00
05 8.00 ~ 11.00
06 11.00 ~ 15.00
07 15.00 ~ 20.00
08 20.00 ~ 22.00
09 22.00 ~ 26.00
10 26.00 ~ 30.00
11 30.00 ~ 45.00
12 45.00 ~ 60.00
13 60.00 ~ 74.80
2 Selectable Edge number: 01=1, 02=2, 03=3, 04=4
q
0 XX X X
w e r t y u i o !0 !1 !2
X X X X X X X 0 0 X X X X X X X X 0 0
10 Hz digit: 0–9 1 Hz digit: 0–9 1 kHz digit: 0–9
100 Hz
digit: 0–9
100 kHz
digit: 0–9
10 kHz
digit: 0–9
10 MHz
digit: 0–7
1 MHz digit: 0–9 1 GHz digit: 0 (Fixed)
100 MHz
digit: 0 (Fixed)
10 Hz digit: 0–9 1 Hz digit: 0–9 1 kHz digit: 0–9
100 Hz
digit: 0–9
100 kHz
digit: 0–9
10 kHz
digit: 0–9
10 MHz
digit: 0–7
1 MHz digit: 0–9 1 GHz digit: 0 (Fixed)
100 MHz digit: 0 (Fixed) Frequency range
Lower edge Higher edge
Edge number: 01–04