Icom IC-F3062T - Transmitting a Status

23
4
BIIS OPERATION
4
Transmitting a status
■
General
D
The status message can be selected with the programmed
text, and the message text is also displayed on the function
display of the called station.
Up to 24 status types (1 to 24) are available, and the status
messages 22 and 24 have designated meanings.
Status 22: Emergency*
Status 24: GPS request
* The status 22 can also be used as a normal status message
by disabling the designated meaning. However, the status 24 is
fixed.
The status call can be sent with both individual and group
calls.
Transmitting a status
D
While in the standby condition, push [Digital Button], then q
push [CH Up] or [CH Down] to select the desired station/
group code.
Push [Digital Button] again, then push [CH Up] or [CH w
Down] to select the desired status message.
Or, you can select the desired status message using [Sta-
tus Up]/[Status Down] key directly.
TXCECALL TXC BIFN
STATUS 01
TX Status 01
Status message is displayed.
Push [Call] or [PTT]* to transmit the status message to the e
selected station/group.
* PTT call can be made only when PTT call capability is permit-
ted.
• 2 beeps will sound and the transceiver returns to the standby
condition automatically when the transmission is successful.