Icom IC-F3062T - 7 Swivel Belt Clip; Contents; Attaching

34
7
SWIVEL BELT CLIP
MB-93 contents
■
Qty.
Belt clip q .......................................................................... 1
Base clip w ........................................................................ 1
q w
Attaching
■
Remove the battery pack if it is attached. (( q ☞p. 2))
Slide the base clip in the direction of the arrow until the w
base clip is locked and makes a ‘click’ sound.
Clip the belt clip to a part of your belt. And insert the trans- e
ceiver into the belt clip until the base clip inserted fully into
the groove.
Once the transceiver is locked in place, it swivels as illus- r
trated below.
Once the transceiver is locked in place,
it will swivel 360 degrees.