5 - 9
ADJUSTMENT
[ADJUST ITEM]
ADJUSTMENT CONDITION OPERATION VALUE
CTCSS/DTCS
DEVIATION
[CTCSS/DTCS]
1 • Channel : 1-12
No audio signals are applied to the JIG cable.
Transmitting
Connect a Modulation Analyzer
to the antenna connector through
an Attenuator.
±0.66 to 0.70 kHz
•
•
5-3 TRANSMIT ADJUSTMENT (continued)
Select an adjustment item using [
↑
] / [
↓
] keys, then set to the specifi ed value using [
←
] / [
→
] keys on the connected PC’s keyboard.
MODULATION ANALYZER
(0.1–300 MHz)
SETTING;
HPF : OFF
LPF : 20 kHz
De-emphasis : OFF
Detector : (P-P)/2
ATTENUATOR
(30 dB/10 W)
To Next Page
Loading...
