Icom IC-F50V - Page 15

8
2
PANEL DESCRIPTION
2
SCAN B START/STOP KEY
➥ Push to start and cancel scanning operation. Scan resumes
after a specified time period has passed when scan is cancelled
except for this key.
➥ Push and hold this key for 1 sec. to indicate the scan group, then
selectthedesiredscangroupusing[CHUp]/[CHDown].
SCAN ADD/DEL (TAG) KEY
➥Pushtoaddordeletetheselectedchannelto/fromthescan
group.
 1.Pushtoindicatethescangroup,thenpush[CHUp]or[CHDown]
to select the desired group.
 2. Pushtoaddordeletethechannelto/fromtheselectedscangroup.
3. Push and hold for 1 sec. to exit the scan group selection mode.
➥Pushthiskeywhilescanispaused(asignalisdetected)on
achannel(exceptforprioritychannel,)thechanneliscleared
from the scan group.
Depending on the setting, the cleared channel is added to
thescangroupagainafterthescaniscancelled.(Nuisance
Deletefunction)
PRIORITY CHANNEL KEYS
➥PushtoselectPriorityAorPriorityBchannel.
➥Pushandhold[PrioA(Rewrite)]or[PrioB(Rewrite)]tosetthe
operatingchannelasthePriorityAorPriorityBchannel.
MR-CH 1/2/3/4 KEYS
Pushtoselectthememorychannel1to4directly.
LOCK KEY
Push and hold to toggle the key lock function ON or OFF.
• All programmable keys except the followings are electronically locked
whenthekeylockfunctionisactivated:[PTT],[Light],[LoneWorker],[Sur-
veillance],[Call](incl.CallAandCallB),[Moni(Audi)]and[Emergency].