58
5
MENU SCREEN
2001 NEW 2001 NEW
Config Set mode
Meter Squelch Level
(Default: 10)
Adjust the squelch threshold level to between 0 and
50, in 1 digit steps.
When the S-meter squelch is activated, only signals
stronger than this set level are received.
Noise Blanker
(Default: OFF)
Turns the noise blanker function ON or OFF.
The Noise Blanker function eliminates pulse-type
noise such as that from car ignitions.
Noise Blanker Level
(Default: 10)
Adjust the Noise blanker level to between 0 and 15,
in 1 digit steps.
The set level is effective when the Noise Blanker is
activated.
Noise Blanker Depth
(Default: 7)
Adjust the Noise blanker depth to between 0 and 9,
in 1 digit steps.
The set level is effective when the Noise Blanker is
activated.
Clear Talk Level
(Default: 10)
The Clear Talk function adjusts signals in the pres-
ence of noise using the DSP circuit. This item adjusts
the Clear Talk Level to between 1 (Minimum) and 15
(Maximum).
D Setmode (Continued)
To Next Page
Loading...
Need help?
General
