Icom IC-M127

© Operation from the intercom speaker
@ Push and hold the intercom switch and speak into the
speaker.
® Keep pushing the intercom switch to receive an answer.
@ Release the intercom switch to return the transceiver to
cabin control of the intercom switch.
NOTE: While the intercom switch is pushed, the trans-
ceiver display appears as below. Transceiver functions
(transmit and receive) are interrupted when the external
intercom switch is turned ON. If the transceiver is trans-
mitting, the intercom function is not available.
SGGAQAAK
OTHER FUNCTIONS 5
© Operation with 2 separate intercoms
When you connect 2 intercom switches and 2 intercom
speakers to the transceiver, you can talk to two separate
places such as the deck and the fly bridge.
Connect the switches and speakers as illustrated on p. 34 be-
fore operating with 2 speakers.
To output from intercom-1 speaker
@ Push [HU/IC] once or twice to turn the intercom ON.
@ Push and hold the PTT switch and speak into the mic.
To output from intercom-2 speaker
@ Push [HU/C] once or twice to turn the hailer ON.
@ Push and hold the PTT switch and speak into the mic.
When speaking from the intercom speakers
Push and hold intercom switch 1 or 2, then speak into the
speaker as described at left.
1
nr wr
INCOM TALK TALK
‘Speak into intercom-1 speaker Speak into intercom-2 speaker
G NOTE: The hailer function CANNOT be used when you
Z connect 2 intercom speakers.
23