Icom IC-M127

6 SET MODE
© Scan type
Depending on your preference, you can
select scans to function as normal scan
or priority scan, See p. 10 for scan de-
tails.
Normal scan: all tag channels are
checked in sequence.
Priority scan; same as normal scan ex-
cept that channel 16 is monitored be-
tween tag channels.
n-
SCAN TYPE
Normal scan is set
Nhl
Priority scan is set
© Scan timer
This item sets the scan behavior when
receiving a signal. When set to OFF,
scan pauses on a signal until it disap-
pears, then resumes 3 sec. after that;
when set to ON, scan resumes 5 sec.
after receiving a signal, regardless of
whether it disappears or not.
TIMER
‘Scan timer is turned OFF
© Weather alert
This item turns the weather alert func-
tion ON and OFF. When the transceiver
is scanning or watching a weather
channel and a weather alert tone is
broadcast, an alert beep sounds (and
“ALT” flashes) indicating that an emer-
gency weather report is on the air.
Wk ALERT
Weather alert function
is turned ON
oF
ALERT
Weather alert function
is tured OFF